Philips SCF205 Mode D'emploi page 9

6 Remove the jar from the container and turn the control knob to
the m position.
Note: Always check that the contents of the jar are at the correct
temperature, by testing some on the back of your hand.
keeping warm
With the Baby Bottle Warmer you can also keep the bottles and jars
warm for a short time. To do this set the control knob to position v. The
thermostat ensures that the set temperature is maintained. For
microbiological and hygienic reasons baby food should never be kept
warm for longer than one hour.
operation in the car
Follow the same instructions as mentioned above.
Note: For quickly warming up baby food in bottles and jars, adjust the
click-step control knob to the "jar" symbol. Because the car battery is now
being used instead of the mains supply, the time required for warming up
may be slightly longer.
Warning: Prolonged use of the Baby Bottle Warmer (several hours) can
weaken your car battery.
maintenance
Cleaning
Disconnect the Baby Bottle Warmer from the mains (or the cigarette
lighter socket) and allow it to cool down. Clean the container and the
outside of the Baby Bottle Warmer with a damp cloth.
Notes:
- Never immerse the Baby Bottle Warmer in water.
- Do not use cleaning or scouring agents.
The type plate is located at the bottom of the product.
Warning: If a fault occurs, consult your dealer or Philips' service centre.
Under no circumstances should you try to repair the unit yourself, as this
would invalidate the warranty.
All manuals and user guides at all-guides.com
EngliSh
9