Pkm 9099-2H Mode D'emploi page 28

2.3 Installation steps
WARNING! Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
WARNING! Do not damage the wiring in the wall while drilling
NOTICE! At least one assistant is required for installation.
1. Locate the hood on the wall. Mark the positions of the support holes (A/B) to
be drilled.
Note:
A/B Drill holes of the support openings.
C/D Drill holes of the anchor holes.
All manuals and user guides at all-guides.com
28