Step 25
Insert the SLIDE CAMS (UU) into the large holes in the
å
LARGE DRAWER SIDES (D28 and D29).
Fasten the WIDE EXTENSION SLIDES (HH) to the
å
LARGE DRAWER SIDES (D28 and D29) using holes #1
and #4. Use four GOLD 5/16" FLAT HEAD SCREWS (FFF).
NOTE: The screw head in the CAM must be visible
å
through the slotted hole in the SLIDE.
Repeat this step for the other large drawer.
å
HH
3
4
Page 30
Open end
1
2
T
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
UU
D29
D28
FFF
408920
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
UU
2
HH
3
4
www.sauder.com/services
Open end
1