Samsung Smart Dome SCC-C6455P Manuel D'utilisation page 26

setup
DAY/NIGHT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 18)
1. Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of
the scene.
NIGHT : Fixed to NIGHT mode,
regardless of the scene.
If BURST is set to <ON>, the burst
signal will be output along with the
black-and-white composite video signal.
AUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice
versa.
- BURST : If set to <OFF>, the burst
signal will not be output in NIGHT mode.
- DAY NIGHT BRIGHTNESS : Specify
the brightness level switching from
COLOR to BW fi lter.
Adjusting from HIGH to LOW will cause
to switch the fi lter in a darker screen.
- DAY NIGHT DWELL TIME : Time
required to determine the fi lter switch.
- NIGHT DAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the
fi lter in a darker screen.
- NIGHT DAY DWELL TIME : Time required to determine the fi lter switch.
- MASK AREA : If there exists a bright
spot light source in a night scene, you
can specify the size and position as
needed.
This will prevent an error in switching
fi lter, or failure to determine the fi lter
switch in a night scene where a bright
spot light source exists.
Any excessively bright area in a night
scene will be MASKed.
26_ setup
All manuals and user guides at all-guides.com
DAY/NIGHT
WHITE BAL WHITE BAL
FOCUS MODE FOCUS MODE
ZOOM SPEED ZOOM SPEED
DISPLAY ZOOM DISPLAY ZOOM
DISPLAY P/T DISPLAY P/T
DIGITAL ZOOM DIGITAL ZOOM
DETAIL DETAIL
V-SYNC V-SYNC
AUTO AUTO
BURST
DAY NIGHT DAY NIGHT
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
NIGHT NIGHT DAY DAY
BRIGHTNESS BRIGHTNESS
DWELL TIME DWELL TIME
MASK AREA MASK AREA
MASK AREA MASK AREA
<SIZE>
<LOCATION> <LOCATION>
AUTO
ONEAF ONEAF
[ 2 2 ] ] [
OFF OFF
OFF OFF
OFF OFF
[ [ 2 2 ] ]
INT INT
OFF
MID MID
2SEC 2SEC
MID MID
5SEC 5SEC
1 1 2 2