Publicité
Les langues disponibles
Les langues disponibles
CK3100 MOUNTING
CK3100 MOUNTING
Installation of the electronic box
The CK3100 system is fitted with 4 outputs:
Input - in-car radio output / power / LCD screen / microphone
It is recommended to install all the cables before fixing the control box. Each cable
supplied has a different connector to avoid wrong connections.
The box must not be installed near the heating or the air-conditioning.
Ensure that it is not exposed to sunlight. Avoid installing it behind metal walls, which
could alter the quality of the bluetooth link.
Installation of the in-car radio cable
The mute cable is equipped with black ISO connectors and with a "line out" output.
In-car radio with "line in" inputs
Preferably use this type of connection by joining the brown and green wires as well as
the yellow wires of the "mute" to the back of your in-car radio.
In-car radio with "ISO" connectors
Disconnect the audio and supply bundles from the in-car radio
Link the female connectors of the mute supply cables and of the supply cable to
the in-car radio. Connect the audio and supply bundles from the vehicle to the male
connectors.If the in-car radio is equipped with a mute input, connect the yellow wire
of the mute cable to one of the " Mute in " inputs 1, 2 or 3.
In-car radio without "ISO" connectors
You must obtain an "ISO" adapter cable
Installation of the supply cable
The red wire of the power cable must be connected to the permanent 12V, the
orange wire to the 12V and the black wire to the earth.
Verify the electric wiring of the ISO supply bundle of the in-car radio.
In some vehicles it is necessary to reverse the positions of the red and orange wires.
This operation is simply done by reversing the fuse holders.
Do not connect the orange wire to the permanent 12V, otherwise you risk causing
the vehicle battery to go flat.
CK3100 Advanced Car Kit
17
17
All manuals and user guides at all-guides.com
CABLE DIAGRAM CONNECTION
CABLE DIAGRAM CONNECTION
User's guide
En
En
18
18
Publicité
