Troubleshooting; Before Calling For Service; Troubleshooting Guide - Franklin Chef FIM70 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before Calling for Service

If the unit appears to be malfunctioning, read through the OPERATION section of this
manual first. If the problem persists, check the TROUBLESHOOTING GUIDE below
and on the following page. The problem could be something very simple which can be
solved without a service call.
Problem
The ice maker is unplugged. Plug the ice maker in.
The fuse is blown.
The machine
doesn' t operate.
The ice maker power
switch is OFF.
The ice storage bin is full of
ice.
The water supply tap is
The water doesn' t
turned off.
feed in after the ice
The water supply line is not
maker starts.
connected properly.
The bin should fill up and
the machine shut off in
9-14 hours. If not, the
condenser may be dirty.
The bin drain may be
partially restricted.
Machine makes
ice, but ice storage
The airflow to the ice
bin does not fill up
maker may be obstructed.
with ice.
The ambient temperature
and water temperature are
high, or machine is near
some heat source.

TROUBLESHOOTING

Troubleshooting Guide

Possible Cause
26
Probable Correction
Replace fuse. If it happens again, call
for service to check for a short circuit
in the ice maker.
Turn the ice maker power switch ON.
Remove some ice; make sure the
ice-full sensor is free of ice.
Turn on the water supply tap.
Reconnect the water supply line.
Clean the condenser.
Clean out the drain; check the
installation.
Check the installation.
Check the installation.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fim90Fim120

Table des Matières