JVC TK-C205VPU Manuel D'instructions page 10

Names and Operations of Parts
Main unit bottom/side/top
bottom
1 Safety cable installation screw
Install the safety cable using this screw.
(Safety cable not included.)
CAUTION
To avoid unforeseen accidents, attach a
safety cable. Otherwise, there is nothing
to prevent the camera from falling should
it come loose.
Mounting holes (for mounting to the
2
electrical box)
When using a 4 inch square electrical
box, the 2 holes are used to fix the box
in place.
CAUTION
Use screw size suitable for the mounting
3
holes (ø5mm ( / ")).
16
3 Mounting holes (for mounting to the
ceiling)
These holes are used to mount the
camera body to the ceiling.
E-8
All manuals and user guides at all-guides.com
side
CAUTION
Use screw size suitable for the mounting
3
holes (ø5mm ( / ")).
16
4 Conduit hole
Hole for installation to conduit hole pipe
and wiring.
5 Conduit plug & hole (side)
When the unit cannot be installed to the
ceiling, the pipe is mounted to this hole
for wiring.
6 Tamper-resistant screws
Tamper-resistant screws for fixing the
dome cover to the base.
Use the provided wrench to install/
remove the Tamper-resistant screws.
top