Franklin Electric PUMPTEC Manuel Du Propriétaire page 2

Before Getting Started
s
! CAUTION
or the need for motor overload protection. Installation and motor overload
protection should be in accordance with National Electrical Code Article 430
or in accordance with motor manufacturer's recommendations.
Pumptec is a microcomputer-based pump protection device that
continuously monitors motor load and power line conditions to provide
protection against dry well conditions, waterlogged tanks, and abnormal
line voltage conditions
Indicator lights provide complete system status, which can be easily
viewed without removing the cover. Pumptec interrupts power to the
motor whenever the motor load drops below a preset level or the load
drops quickly.
Pumptec is optimized to work with Franklin 2- and 3-wire single-phase
motors from 1/3 to 1.5 hp. An underload (dry well) adjustment is
provided to address unusual situations.
Features
Protection Features
• Dry Well (Underload)
• Over & Under Voltage
• Rapid Cycle
• Bound Pump
Indicator Lights
• Load
• Voltage
• Status
2
All manuals and user guides at all-guides.com
This product does not replace a motor control box
Other Features
• Heavy-Duty Relay
• 115 V/230 V 50/60 Hz Operation
• Alarm Circuit Contacts