Publicité
Les langues disponibles
Les langues disponibles
STEP 16
ADD WATER
• Fill the basin by adding water to the pump access or by
placing a running garden hose on top of the basin.
STEP 17
PLUG IN THE PUMP AND TWEAK THE WATERFALL
• When the basin is filled and the waterfall foam is dry, plug
in the pump and test the waterfall.
• You can tweak the waterfall by placing smaller stone and
gravel on the waterfall cascades. This will change the
appearance and sound of the water. Have fun playing
with the water coming over the falls until you achieve the
desired effect.
All manuals and user guides at all-guides.com
US (866) 877-6637 |
STEP 18
TRIM THE LINER
• With the waterfall running, go
around and trim off any excess
liner, leaving several inches
above the water level (Figure
45). The remaining liner edges
can be covered with gravel
or other suitable landscape
material.
Note: Do not trim the liner until the waterfall is
running and the basin is filled to the desired level.
Prematurely trimming the liner may cause leaks.
STEP 19
ADD PLANTS AND NATURALIZE EDGES
• If desired, add marginal plants within the feature to provide
additional aesthetic interest. Compatible plants include
Creeping Jenny, Forget Me Not, and more.
• Terrestrial plants can also be added to the surrounding
landscape to help tie the water feature into its surrounding
environment.
• The area around the basin can now be mulched to
naturalize the feature into the surrounding landscape.
CAN (866) 766-3426
Figure 45
19
Publicité
