AquaScape 83013 Manuel D'instructions page 11

STEP 7
AQUABASIN PLUMBING INSTALLATION
®
• Using the black silicone sealant,
coat the threads of one of the PVC
male adapter fittings. Then, thread
the fitting into the outside of the
bulkhead (Figure 10). The sealant
will help to provide a watertight seal.
• Next, apply a coating of PVC pipe cement to the inside
of the fitting (figure 11A) and the outside of the PVC pipe
(Figure 11B). Then, insert the pipe into the fitting, firmly
holding in place for approximately 30 seconds (Figure 12).
Figure 11A
Figure 12
All manuals and user guides at all-guides.com
Figure 10
Figure 11B
US (866) 877-6637 |
INSTALLING AN OPTIONAL AUTOMATIC WATER
FILL VALVE
• The AquaBasin 45 provides the option of installing the
®
Aquascape Compact Fill Valve (not included, #88006) to
automatically add water to the feature when needed. This
reduces the time spent manually filling the basin.
• Drill a ¾" (19.05 mm) hole
approximately 4" (10 cm)
from the top of the basin
(Figure 13).
• Follow the directions
provided with the fill valve
to complete the installation
(Figure 14).
CAN (866) 766-3426
Figure 13
Figure 14
11