Publicité
Les langues disponibles
Les langues disponibles
• Insert the pipe into the fitting, firmly
holding in place for approximately
30 seconds (Figure 42).
• Once plumbing connections are
complete, bury the pipe by filling in
the trench around it.
STEP 14
DISGUISE THE WATERFALL SPILLWAY
• Finish the Waterfall Spillway
installation by disguising
the spillway using rocks,
logs, soil, or other creative
landscape materials (Figure
43). This will help to create
a natural-looking waterfall.
18
All manuals and user guides at all-guides.com
Figure 42
Figure 43
aquascapeinc.com
STEP 15
APPLY POND AND WATERFALL FOAM SEALANT
• The included Pond and Waterfall Foam Sealant is used to
fill in gaps between the waterfall rocks, forcing the water to
run over the waterfall rocks, not beneath them.
• Use the Pond and Waterfall Foam Sealant to seal any
gaps or joints around the face of the Waterfall Spillway
and the surrounding waterfall (Figure 44). Allow the foam
sealant to dry for at least one hour before introducing
water
Note: Gravel can be used to disguise the foam.
Wait for foam to partially dry prior to adding gravel.
Figure 44
Publicité
