Eton SOUND 100 Mode D'emploi page 7

MANUAL
All manuals and user guides at all-guides.com
SETTING THE ALARM TIME
1. Press the radio's or the remote's ALARM button for 3 seconds;
note that the hour flashes.
2. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the desired wake-up hour.
3. Give the radio's or the remote's ALARM button a quick, short press;
note that the minutes flash.
4. Use the radio's TUNING/SET buttons or the remote's TUNE +/-
buttons to set the correct minutes.
5. Press the radio's or the remote's ALARM button; note that the
speaker symbol flashes for 5 seconds and then disappears. The
alarm time is now set.
ACTIVATING THE ALARM
For the alarm to function it must be activated. To do this, use quick,
short presses of the radio's or the remote's ALARM button, causing
the following to appear in the display:
• ALARM with speaker symbol – wakes you up to a beeper sound.
• ALARM with musical note symbol – wakes you up to the last
radio station selected by either tuning or by selecting a memory.
• ALARM, speaker symbol and musical note symbol all disappear
from the display, thus deactivating the alarm completely.
NOTE: When using the alarm with the musical not symbol, be sure to
turn the volume up to a level that will wake you.
WAKING TO A MEMORY PRESET
Tune to the memory preset of your choice, set the alarm time, acti-
vate the alarm and place the Etón Sound Radio in standby mode.
ETÓN SOUND 100 OWNER'S MANUAL
5