Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
PROBLEM
Missing Parts/Accessories
The vacuum cleaner does
not start
Dust coming out of the
exhaust port
Loss of suction
Static Shock
Mist in exhaust air
TECHNICAL DATA
Power
Supply Voltage
Protection
Tank capacity
Tank construction material
Vacuum Pressure (kPa)
Weight (kg)
This tool is double insulated. There are two independent barriers of
insulation to protect you from the possibility of electric shock.
11
All manuals and user guides at all-guides.com
POSSIBLE CAUSES
1. They are wrapped up in
the tank.
1. No power at the outlet.
2. Not plugged in correctly.
3. The power cord is cut.
4. On/Off switch defective.
5. Defective Motor.
1. The filter is not installed
or not installed correctly.
2. The filter is damaged.
3. The filter is clogged or
the dust is too fine.
4. The filter doesn't work.
1. The flexible hose fitting
is loose.
2. Filter clogged.
3. Tank or bag full.
4. Hole in the hose.
5. Hose or accessory
clogged.
1. Dry environment.
2. Air's relative humidity
too low.
1. The filter is saturated.
SOLUTIONS
1. Check the tank.
1. Check the power.
2. Unplug/insert the plug
into the outlet again.
3. Have it replaced by an
Authorised Customer
Service Center.
4. Have it repaired by an
Authorised Customer
Service Center.
5. Have it repaired by an
Authorised Customer
Service Center.
1. Install the filter correctly.
2. Replace the filter.
3. Use a more efficient filter.
4. Clean or replace the filter.
1. Tighten the fitting.
2. Clean or replace the filter.
3. Empty or replace them.
4. Replace the hose.
5. Check and unclog as
necessary.
1. Increase humidity. (Where
possible, use a portable or
stationary humidifier.)
2. This is temporary and does
not affect the use of
the vacuum cleaner.
1. Clean or replace the filter.
1000W (1100W Max.)
230V~50Hz
IPX4
16 Litres
Polypropylene
15,7
5,45
Publicité
