Kessel FKA Instructions De Pose Et D'utilisation page 43

5.4 Manual mode, general
The following can be carried out in the manual mode:
– Move the backwater flap to the OPEN / CLOSED position
5.4.1 Backwater flap manual mode
Closing the backwater flap in the manual mode
Only possible if there is no backwater present. The backwater flap LED <22>
must be off and „Backwater: no" must be shown on the display.
• Press the backwater flap key <25>, an alarm signal is heard and the
backwater flap is moved from the OPEN to the CLOSED position. The
backwater flap LED <22> flashes during the change
of position. The backwater flap is closed when the backwater flap LED
<22> comes one, the display also shows "Flap closed". The alarm signal
can be switched off with the Alarm key.
Opening the backwater flap in the manual mode
Only possible if the backwater flap has been closed in the manual mode and there is no backwater (backwater flap
LED <22> is on).
• Press the backwater flap key <25>, the backwater flap is moved from the CLOSED to the OPEN position. The
backwater flap LED <22> flashes during the change of position. The backwater flap is open when the backwater flap
LED <22> goes out and the display shows "Flap open".
5.5 Operating menu
The number <24> of the respective menu level is shown as a figure in
the top line on the display.
Opening the menu
• Press the OK key <69>, menu 1 appears*
Control panel
Select from menu levels and selection lists: cursor keys.
Setting values: Select with the OK key, set with the cursor keys, confirm
the setting with the OK key.
Save: You will be asked if you want to save the settings after every dialogue, OK = save, ESC = abort.
2019/04
All manuals and user guides at all-guides.com
Operation
43 / 148
25
FLAP
Ill. [18]
24
Datum
12.01.17
Uhrzeit
14:22:35
Rückstau
ja
Klappe
geschlossen
Ill. [19]
22