Sencotel Granitore 1 Mode D'emploi page 39

ALARMS
In case of probe failure, the display will show the following alarm messages:
"A1": Tank 1 probe disconnected
"A2": Tank 1 probe short circuit
"A3": Tank 2 probe disconnected
"A4": Tank 2 probe short circuit
"A5": Tank 3 probe disconnected
"A6": Tank 3 probe short circuit
During operation, the temperature display shows the temperature of the product
in the tanks, cyclically showing the temperature of the product rst in one tank
and then in the other, every 3 seconds.
To see which tank is referred to with the temperature reading, it is necessary to
check which decimal point is being shown.
If the decimal point viewed is on the left, the temperature reading refers to the
tank 1 (see Fig.2 Page 4).
Fig.17
If the decimal point viewed is in the centre, the temperature reading refers to the
tank 2 (see Fig.2, Page 4).
Fig.18
If the decimal point viewed is on the right, the temperature reading refers to the
tank 3 (see Fig.2, Page 4).
Fig.19
SL310006569 Ed.01 - 03-2014
2 TANKS
3 TANKS
machine and contact your nearest assistance centre.
uct in the tanks.
The consistency of the granita may be adjusted (+/-) by means of the screw
shown in the gure
Fig.20
To dispense the beverage, pull the tap lever.
Fig.21
. key. If the
-
-
-
-
- 11 _EN-