Sencotel Granitore 1 Mode D'emploi page 38

Changeover switch : in position "II" refrigeration system on (cooling mode).
Fig.13
Press the switch to turn on the machine lid light.
Fig.14
The temperature display serves to view the temperature of the product inside
the tank and to regulate it when the machine is operating in "cold drinks fridge"
mode.
Switch (A) in position "I": power is being supplied to the machine.
Switch (C) in position "I": the mixer is operating.
Switch (D) in position "I": Refrigerator system operating (slush drinks - granita).
To make COLD DRINKS:
Switch (D) in position "II": Refrigerator system operating (cold drinks).
Switch (D) in position "0": Refrigerator system off (mixing only).
- 10 _EN-
Fig.15
A
C
D
E
3 seconds after the last key is pressed, the setting is stored to memory and the
display will show the temperature of the product in the tank.
ALARMS
In case of probe failure, the display will read A1.
Programming and adjustment outputs will be disabled.
6.4.
For the sake of simplicity, we will show how to enable the right-hand tank; for
the other tanks, it is suf cient to carry out the same sequence of operations on
the switches for the tank concerned.
Switch (A) in position "I": Machine powered.
Switch (C) in position "I": Mixers operating.
Deviators (D) in position "I": Refrigerator system operating (slush drinks - granita).
To make COLD DRINKS:
Deviators (D) in position "II": Refrigerator system operating (cold drinks).
Deviators (D) in position "0":Refrigerator system off (mixing only).
2 TANKS
A
E
Fig.16
C
D
3 TANKS
A
E
SL310006569 Ed.01 - 03-2014
C
D