kqueo K-LIFT SBASE Mode D'emploi page 38

2. Function and operation of the keypad
Key
Up Key
Down key
3. Reset procedure
IMPORTANT : You will need to reset the desk before using it for the first time.
- Make sure that the tray does not touch any wall.
- Make sure that the path to the desk is free of obstacles.
- Make sure that all cables have the appropriate length to accommodate the height
change.
a. Press the "UP" and "DOWN" buttons simultaneously for 5 seconds until "RES"
appears on the display and the system beeps, then the system will be reset.
b. If the tray position is not at the lowest height, press the "UP" and "DOWN" but-
tons simultaneously until the tray reaches the lowest position and the system
beeps; the system will then be reset.
Function Description
To raise the tray,
press this button.
Tray up Press this button until
the desired height is
reached.
To lower the tray,
press this button.
Tray
Press until the de-
down
sired height is
reached.
17
Note
The desk will contin-
ue to rise until you
release the key or
the maximum height
is reached.
The desk will contin-
ue to be lowered un-
til you release the
key or the minimum
height is reached.