EffectiV HVAC PLAY-UV Manuel D'installation Et D'opération page 4

UV Diffusers Installation and Operation Manual
Figure 3. Remove the four screws holding the UVC Barrier in place, then slowly pull down the UVC Barrier
Figure 4. Secure the filter back in place with the three filter clips. Make sure they are all fully pushed in
Connecting to the electrical system
IMPORTANT: UV Diffusers must be connected to the building power by a certified electrician.
8. Bring a 110V, 120V, 220V or 240V current line to the diffuser and have a certified electrician do the proper
connections inside the junction box, following the diagrams in Figure 5.
CAUTION : NEVER LOOK DIRECTLY AT THE LIGHT.
WEAR GLASSES AND/OR FACE MASK PROTECTION.
p. 3