EffectiV HVAC PLAY-UV Manuel D'installation Et D'opération page 2

UV Diffusers Installation and Operation Manual p. 1
Important Safety Instructions
Read the maintenance instructions before opening the appliance
WARNING: Unintended use of the appliance or damage to the housing may result in the escape of dangerous UV-C
radiation. UV-C radiation may, even in small doses, cause harm to the eyes and skin.
WARNING: Appliances that are obviously damaged must not be operated.
WARNING: UVC light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration
(mild to severe sunburn) to exposed skin. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE.
WARNING: Always turn off the power or unplug UV diffusers from the power source prior to doing any installation of
maintenance.
IMPORTANT: DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result
in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Do
not clean the bulb with chemicals.
The use of this device is a supplement to and not a substitute for standard infection control practices; users must
continue to follow all current infection control practices, including those related to the cleaning and disinfection of
environmental surfaces.
UV Diffusers Operating Conditions
UV Diffusers are meant to be installed in ceilings 8.5 feet to 13 feet (2.6 to 4 meters) high.
UV Diffusers can be used for ventilation, air conditioning and heating with air volumes between 0 and 550 cfm.
The minimum rated air temperature is 40°F (5°C) and the maximum rated air temperature is 110°F (43°C).
Installing the Diffuser
IMPORTANT: UV Diffusers must be installed by a certified HVAC technician and connected to the building power by a
certified electrician.
1. Align the conical collar with the rectangular opening on the side of the plenum as shown in Figure 1.
Figure 1. Collar should be perfectly aligned with the rectangular opening in the plenum