dirna Bergstrom SCANIA NTG SLIM Instructions De Montage page 15

SLIM
1
Take down the hatch and the attachment elements,
and hand them over to the customer.
2
CAB EXTERIOR:
Position the Slim in the opening for the hatch.
3
Fix the equipment with (16) WN5451 (60x20)
plastic screws with a tightening torque of 3,75 ±
10% Nm. maintaining the following order:
• First tighten the (4) corner screws (following the
numerical order of the attached figure) and then
the rest of the screws.
1
Hatch
15
EN
2