Télécharger Imprimer la page

Sylvania SDVD7073 Mode D'emploi page 15

Masquer les pouces Voir aussi pour SDVD7073:

Publicité

Les langues disponibles

Les langues disponibles

SYSTEM SETUP
Press the SETUP Button, the setting menu will appear on the screen as below. During setting, using Direction
◄, ►, ▲, ▼
Buttons to select and highlight the function you
to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.
S Y S T E M S E T U P:
1. If TV System is selected, it can only be set to NTSC, PAL or AUTO to match the connected TV.
2. If POWER RESUME is selected, if set it On,the unit will start playback from the position where the disc was
stopped last time.
3. If Screen Saver is selected, if set to On, the screen saver will come on when the unit idles or the image is
paused for several minutes.
4. If TV Type is selected, set the aspect ratio to match the connected TV.
5. If Password is selected, press the
times to unlock the rating, press ENTER button to confirm. Now the lock status will be
(NOTE: SUBTITLE Button stands for "1", TITLE for "2", MUTE for "3", MENU for "4", STOP for "5", the default
password is "1111".)
To change a new password, highlight the password and press the "TITLE" or "MENU" four times during
unlocking status to set new passwaord to "2222" or "3333", then press ENTER button to confirm.
6. Under password unlocking status, if Rating is selected, press the
button to select the desired
~ Rate levels:
1. KID SAFE:
Kid safe
2. G:
All ages
3. PG:
Parental Guidance
4. PG 13:
Parental Guidance less than 13 years old
5. PG-R:
Under 17 years old, Parental Guidance suggested
6. R:
Under 17 years old, Parental Guidance strongly
7. NC-17:
17 years old or above
8. Adult:
Adult only
7. When Text To Speech is selected to ON, the player will have a voice during pressing each button, the default is
OFF.
8. If Default is selected and set it to restore, all settings will be restored to factory setting.
SYSTEM SETUP
TV System
POWER RESUME
TFT
Screen Saver
TV Type
Password
Rating
Text to speech
Default
button to highlight the
rating level, then press ENTER button to confirm setting.
15
need to set or reset. Press the
, then press the SUBTITLE button four
button to enter rating level, press
ENTER
Button
.
or

Publicité

loading