Proxxon Microcutter MIC Notice D'utilisation page 9

The safety aspect was included as well: The
saw blade is enclosed by a protective casing
that opens automatically when the device
dips into the work piece. This considerably
reduces the risk of injuries. Exchanging saw
blades is absolutely no problem thanks to
the integrated shaft lock and the easily ac-
cessible saw blade fixation screw.
3 Scope of delivery:
1 piece Microcutter MIC
1 piece Operating instructions and safety
guidelines
2 pieces Replacement saw blades
4 Technical data:
Motor:
Voltage:
Capacity:
Device:
Length:
Housing diameter:
Weight (including
connecting cable):
Saw blade rotational speed: 15,000/min
Max. saw blade diameter: 23 mm
Noise generation:
Use only in dry rooms
Protection class II device
Do not dispose of the electrical
device in the household waste!
All manuals and user guides at all-guides.com
220 - 240 V,
50/60 Hz, ~
30 watt
approx. 240 mm
approx. 36 mm
approx. 390 g
< 70 dB(A)
For your safety, always wear hearing protec-
tion while working!
5 Commissioning
Your Microcutter MIC is ready for use when
delivered and does not require special com-
missioning measures. However, each time
before you begin work, check the device for
signs of obvious damage and make sure
that the automatic saw blade cover works
correctly and swings back automatically to
the home position whenever the device is
not in use.
Always ensure your own safety. Despite its
compact size, the Microcutter MIC is an
electric tool that poses a certain risk. Al-
ways make sure to disconnect the mains
plug when you check the device, clean it or
replace the saw blade!
6 Working with the device:
Attention:
For your own safety, wear protective gog-
gles and hearing protection when you work
with the device!
Attention:
While working, make sure the work piece is
held securely! Flying work piece parts pose
a hazard!
Attention:
Never press the lock button when the device
is switched on. This would cause mechani-
cal damage!
- 9 -