Logitech CRAYON Guide D'installation page 3

PRODUCT SETUP
1
Insert the tether tube into the fabric pen loop
on the frame of Rugged Combo, making sure
the side with screws is facing down towards
the frame. Tube can be inserted from either side.
2
Place the holder over the pen loop, tting the
notched end over the cable. To lock it in place,
press down on the other end of the holder until
you hear a click.
3
Attach the tether ring by sliding
it onto the Logitech Crayon cap, making sure
it fully covers the orange ring on the cap.
Con rm the notched side matches up with
the power button.
All manuals and user guides at all-guides.com
This side down
Notched side
3 English