Télécharger Imprimer la page

Honeywell FocusPRO 5000 Serie Guide De L'utilisateur page 3

Thermostat numérique programmable
Masquer les pouces Voir aussi pour FocusPRO 5000 Serie:

Publicité

Les langues disponibles

Les langues disponibles

Built-in compressor protection
Damage can occur if the compressor is
restarted too soon after shutdown. This
feature forces the compressor to wait for
a few minutes before restarting.
During the wait time, the display will
flash the message Cool On (or Heat On
if you have a heat pump). When the safe
wait time has elapsed, the message
stops flashing and the compressor turns
on.
Battery replacement
Batteries are optional (for backup
power) if your thermostat was wired to
run on AC power when installed.
Install fresh batteries when the REPLACE
BATTERY warning begins flashing. The
warning flashes about two months
before the batteries are depleted.
Replace batteries once a year, or before
leaving home for more than a month.
All settings are permanently stored in
memory, and do not require battery
power.
firealarmresources.com
Inside
75
Fan
Auto
Message flashes until safe
restart time has elapsed.
Press and pull to remove.
Auto
Replace Batttery
MCR29409
Insert fresh alkaline
batteries, then reinstall
battery holder.
TH5110D:
AAA alkaline batteries.
TH5320U/TH5220D:
AA alkaline batteries.
3
Cool
Setting
75
Cool On
System
Cool
M29410
MCR29411

Publicité

loading