Power Dynamics PDX125 Manuel D'instructions page 2

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER
(OR BACK) THERE ARE NO SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol,within an equilateral triangle,is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (serviving) instructions in the literature accompanying the appliance.
WARNING:
1. Placing a disc with excessive downward force may damage the loader,invalidating the warranty.
2. To reduce the risk of fire or electrical shock,do not expose this appliance to rain or
moisture.Electrical equipment should NEVER be kept or stored in damp Environments.
DANGER:
Invisible laser radiation when open and interlock failed or defeated void direct exposure to beam.
CAUTION:
This product utilizes a laser. Use of controls or adjustments other than those specified
here in may result in hazardous radiation exposure.
CAUTIONS REGARDING HANDLING
Location
Install the player in a well-ventilated location where it will not be exposed to high temperatures or humidity.
Do not install the player in a location which is exposed to direct sunlight, or near stoves or radiators. Excessive heat
can adversely affect the cabinet and internal components. Installation of the
player in a damp or dusty environment may aiso result in a malfunction and
can be hazardous. Avoid installation near cookers etc., where the player may
be exposed to oily smoke, steam or heat.
Installation Guidelines
- Placing and using the compact disc player for long periods on heat-generating sources such as amplifiers or
near spotlights, etc. will affect product performance. Avoid placing the player on heatgenerating sources.
- Install this compact disc player as far as possible away from tuners and TV sets. A compact disc player
installed in close proximity to such equipment may cause noise or degradation of the picture.
- Noise may be noticeable when an indoor antenna is used. In such cases, make use of an outdoor antenna or
turn off power to the compact disc player.
- When the unit is used in a loud-sound environment, e.g., near a speaker, sound skip may occur. Install the
unit away from the speaker or reduce the listening volume.
- Place this unit on a level surface and a stable platform.
- Be sure the player, including its audio and power supply cords, does not touch vibrating materials. Any cause
of vibration other than the insulators may cause the disc to skip. Take special care when using the player
while it is installed in a carrying case.
When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises
sharply, condensation may form inside the unit and impair its performance. In such cases, allow the unit to stand for
about an hour or raise the room temperature gradually.
About discs created on computers
Depending on the application settings and the computer's environmental settings, it may not be possible to play
certain discs. Record the disc in a format supported on this unit. For details, contact your application's retailer.
If the recording quality is poor due to the disc's properties, scratches or dirt on the disc or dirt on the recording lens, it
may not be possible to play the disc.
Creating backup discs
When CD-R/-RW discs are paused or left in the pause mode at cue points for long periods
of time, it may become difficult to play the disc at that point, due to the properties of the disc.
Also, when a specific point is looped repeatedly an extremely large number of times, it may become difficult to play
that point. When playing valuable discs, we recommend making backup discs.
UK