MOB MO9379 Mode D'emploi page 8

All manuals and user guides at all-guides.com
stunts! First of all, fly the aircraft to a height of more than 3 meters, press the 3D Eversion switch on the rear right
side of the transmitter, then push the right rudder (in any direction) to make 360 degree flip.
INSTRUCTIONS FOR ALTITUDE-HOLD CONTROL
STARTING THE QUADCOPTER
Method 1: Press the one-key take-off key once and the quadcopter's propellers would rotate slowly and then lift off
from the ground into the air.
Method 2: Shift the two control sticks outwards into an "A" shape for about one second and the quadcopter's
propellers would rotate slowly.
BAROMETRIC PRESSURE HOVERING AND ALTITUDE-HOLD FUNCTION
Use the left control stick (throttle) to control the quadcopter's ascent/descent. When you let go of the left control stick
(throttle), the quadcopter would remain hovering at the altitude it was at when the left control stick (throttle) was let
go.
TURNING OFF THE QUADCOPTER
Method 1: Shift the two control sticks outwards or inwards into an "A" or "V" shape for about one second and
the quadcopter's propellers would stop rotating.
Method 2: Pull the left control stick (throttle) to the lowest point for three seconds and the quadcopter's
propellers would stop rotating.
ONE-KEY LANDING
When the quadcopter is flying high in the air, press the "One-key Landing" key once and the quadcopter would land
slowly. At this time, you can move the quadcopter to a certain spot by using the direction-change or left control stick.
The quadcopter's propellers would then stop rotating.
Emergency Stop
In case of emergency during the flight, press the emergency stop button to stop the aircraft so as not to cause harm.
WIFI app download see the software for instructions.
Android (Non-China)