MOB MO9379 Mode D'emploi page 7

All manuals and user guides at all-guides.com
Forward/Backward fine-tuning
When the quadcopter keeps flying forward / backward, you can correct it by pressing fine-tuning button down/up.
Sideward fly fine-tuning
When the quadcopter keeps flying to left / right side, you can correct it by pressing fine-tuning button right / left.
Headless Mode instructions
Headless mode operation:
When syncing, the antenna of the transmitter must be aligned the tail of the quadcopter. In normal flight, when
pressing headless button, it sounds DI-DI to enter headless model, and the guide light flashes. Press this button
again, it shouds Di to exit headless mode.
A key return
When the quadcopter fly far away, one key return button can recall the quadcopter. After binding the quadcopter, the
antenna of the transmitter must be aligned the tail of the quadcopter when it take off. Press the one key return button
to go into return mode with the light flash. Press the button again to exit return mode. During the returning, the
forward and backward movement of right lever can interrupt this function.
High and low speed switching
During the flight of the quadcopter, the flight speed can be switched by pressing this button while it forward,
backward, turn left and turn right. The quadcopter speed defaults to a low speed. Press this button once to switch to
medium speed. At the same time, the transmitter buzzer beeps twice. Press the button again to switch to high
speed. At the same time, the transmitter buzzer beeps three times. One more pressing turn back to low speed and
beep once.
3D Eversion
3D Eversion instructions When you are familiar with basic operation, you can do some awesome & exciting tricks an