Publicité
Registering and Unregistering Remote Units for "Visitor
Entry"
[
Visitor Entry] (Entrée visiteur)
This function allows for non-regular wireless communication between an
RTR-500DC and Remote Units which have been registered in RTR-500
Series Base Units.
Up to 42 Remote Units can be assigned "Visitor Entry" status.
1.
In the Main Menu, open [WL Visitor Entry].
2.
To assign "Visitor Entry" status to a Remote Unit, place the target
Remote Unit face down on the RTR-500DC connected to the PC,
and select [Accept Visitor RU].
3.
A [Completed] message will appear with the Serial No. and Unit
Name* of the Remote Unit which has been assigned "Visitor Entry"
status.
4.
To release "Visitor Entry" status, select [Release One] and choose
Messages d'erreur de déclaration
[Unregistered] (Non déclaré)
Ce message s'affiche lorsque la communication est établie
entre le RTR-500DC et un Data Logger qui présente ses
paramètres d'origine ou qui a été réinitialisé à l'aide du
RTR-500DC Settings Utility.
[Duplication] / Remote Unit Name (alternating display)
They will be alternately displayed when communication is
carried out with any Remote Unit which has been already
registered for "Visitor Entry" or any Remote Unit which has the
same Remote Unit Number or the same Group Registration
Info.
[Incompatible]
Ce message s'affiche lorsque la communication est établie
entre le RTR-500DC et un Data Logger incompatible.
* This shows the Remote Unit
Name entered when Remote Unit
Registration was carried out.
Fonctions de communication
51
Publicité
