Publicité
Les langues disponibles
Les langues disponibles
CONNECTIONS
• The main unit, the subwoofer and the SWA-8000S should now be linked (connected).
• The LINK indicators (Blue LEDs) on the subwoofer and the SWA-8000S should be glowing continuously and
not blinking.
• If the LINK indicators are not solid blue, the linking process has failed.Turn off the main unit, go back to Step 2,
and start again.
• You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 10)
CONNECTING THE SURROUND SPEAKERS (SOLD
SEPARATELY)
Surround Speaker (L)
● Place these speakers to the side of your listening position. If there isn't enough room, place these
speakers so they face each other. Position them about 2 to 3 feet above your ear, facing slightly
downward.
● Surround speakers must be connected to the wireless receiver module.
● Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end.
Match the band on each cable to the speaker label by color, and then connect the cable to the speaker.
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPED
ID SET
Wireless Receiver Module
20
Surround Speaker (R)
Publicité
