Télécharger Imprimer la page

GE GBE17HYRFS Manuel D'utilisation Et Instructions D'installation page 12

Réfrigérateur avec congélateur en bas

Publicité

Les langues disponibles

Les langues disponibles

REVERSING THE DOOR SWING (CONT.)
WARNING
leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property
damage.
off of the middle hinge.
secure them with tape.
Turn the door upside down.
move it to the opposite
position
Freezer Door (Lower)
from the case.
11. Move 3 small white hole
covers on the middle mullion
from left side to right side.
To avoid scratch to the surface, cover the knife
blade with tape and slide it under the cover then
pop it out.
upside down.
13. Move the door stop from
current position to the
opposite side.
12
Installation Instructions
14. Tilt or lay the refrigerator down on its back.
Change the bottom foot from left side to right side.
15. Take out the new left bottom hinge from the
accessory bag and screw the new bottom hinge to
left side on bottom of the refrigerator
16. Lift the lower door, carefully,
onto the bottom hinge so
that the hinge pin fits into
the thimble hole.
17. Take out the new left middle
hinge from accessory bag
and insert the hinge pin to
the thimble hole on the
the new middle hinge to
the left side of the mullion.
Be sure the hinge pin is
seated securely in the
thimble hole of freezer
door. Be sure all screws
are tightened.
Refrigerator Door (Upper)
bottom thimble hole to the
hinge pin on middle hinge.
left top hinge to the thimble
of top left side door. Attach
the hinge to the left upper
front side of the case with
screws.
49-1000598 Rev. 5

Publicité

loading