Safety Instructions; General Information; Electrical Safety; Batteries - Renkforce MD 100 Notice D'emploi

6. Safety instructions

Read the operating instructions and safety information carefully. If you do not follow the safety
information and information on proper handling in these operating instruction, we will assume
no liability for any resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become a dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. Safe
operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may damage the
product.
• Always observe the safety and operating instructions of any other devices which are connected to the
product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
b) Electrical safety
• Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated may destroy the product. Allow the product to reach the ambient temperature
before connecting it to the power supply and putting it to use. This may take several hours.
• The product must not get damp or wet (apart from the detection probe).
c) Batteries
• Always ensure that the battery is inserted in the correct polarity.
• To prevent the battery from leaking, remove it from the device if you are not going to use the product for
a prolonged period. Leaking or damaged batteries may cause acid burns if they come into contact with
your skin. Always use suitable protective gloves when handling damaged batteries.
• Batteries must be kept out of the reach of children. Do not leave batteries lying around, as there is a risk
that children or pets may swallow them.
20