Publicité
Les langues disponibles
Les langues disponibles
3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3)
Figure 3
Recommened Mounting Locations
4. Drill into wall at four marked locations with an
appropriate drill bit. (See Figure 4) Insert wall
anchors if necessary.
Figure 4
1.
Insert key and turn
clockwise to open
dispenser. (See Figure 6)
2. Locate tear-notch on
side of wipe pouch.
(See Figure 7)
PAGE 2 OF 9
MOUNTING CONTINUED
LOADING WIPES
Figure 6
Figure 7
5. Hold dispenser over previously drilled holes and
insert screws.
6. Insert nozzle with key toward back of dispenser. Slide
in with "patent pending" facing down. (See Figure 5)
Figure 5
3. Tear straight across to
open. Do not remove
wipe roll from pouch.
(See Figure 8)
4. Pull first wipe from center
of roll up through
opening in pouch.
(See Figure 9)
Figure 8
Figure 9
0222 IH-9920
Publicité
