JVC KW-R510 Manuel D'instructions page 12

DISPLAY SETTINGS
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat step 2 until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
DISPLAY
DIMMER Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
AUTO: Changes between the day and night adjustments when you turn off
or on the car headlights. *
the day adjustments.
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone for setting. ( Illustration above)
3 Set the brightness level (00 to 31).
(Default: BUTTON ZONE: DAY: 25 ; NIGHT: 09
DISP ZONE: DAY: 31 ; NIGHT: 12)
SCROLL * 2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
* 1
The illumination control wire connection is required. ( 14)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
10
Default: XX
1
; ON: Selects the night adjustments. ; OFF: Selects
COLOR
PRESET Select a color for [BUTTON ZONE].
Default: [COLOR 06]
• COLOR 01 to COLOR 29
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW 01 to COLOR FLOW 03: Color changes at different
speeds.
DAY COLOR Store your own day and night colors.
1 RED / GREEN / BLUE: Select a primary color.
2 00 to 31: Select the level.
NIGHT COLOR
Repeat steps 1 and 2 for all the primary colors.
• Your setting is stored to [USER] in [PRESET].
MENU COLOR ON: Changes the button illumination to white color when settings are
performed on menu and list search. ; OFF: Cancels.
Adjust the brightness
1 Press I to enter brightness adjustment.
2
Turn the volume knob to select [BUTTON ZONE] or [DISP ZONE], then
press the knob.
3
Turn the volume knob to adjust the brightness level (00 to 31), then
press the knob.
4
Press MENU to exit.
Default: XX