Publicité
Les langues disponibles
Les langues disponibles
Do not open the treadmill housing; repairs can only be carried out by a
authorized workshop. All liability and warranty claims are excluded in the case of repairs
independent, incorrect connection or incorrect use.
• Wear appropriate clothing during exercise. Long, loose clothing
are not suitable, they could get caught in the treadmill or restrict your movement.
Before using the treadmill, check that clothing and zippers are closed
flash are attached.
• Use sports shoes with flat rubber soles.
• Do not exercise after eating, when you are tired or when you are feeling down
physically weak.
• Start training slowly. Look ahead as you walk. looking forward
yourself during exercise and do not look at your feet.
• For the first time, familiarize yourself with all functions and setting options of the device
train again.
1) Connect the mains plug.
Turn on the switch (the switch lights up
in red) (1), wait for the screen to light up and
invoke the start interface.
2) The screen shows:
power outlet
2.1) "Time":
EN
The clock shows the training time. Lead time is between 0:00 and 99:59
(mm:ss) and the count restarts at 99:59. After walking and a complete stop, the treadmill will start
day before.
2.2) "Speed":
During operation, the current speed value is displayed. The display range of the
speed is: 1.0-6.0 km/h. When the countdown starts, "3", "2" and "1" are displayed.
Gradually increase the speed during training. If the speed suddenly increases accidentally
or due to a malfunction in the electronics, the treadmill stops as soon as you press the button
START STOP.
2.3) "Distance" (KM per training session):
This indicates the practice distance. The adder counts from 0.0 to 99.9 - then the counter is reset
to zero and start counting again. After running and a complete stop, the treadmill goes into standby.
2.4) "Calories":
This displays the calorie consumption value. The calorie consumption value is counted
from 000 to 990 when counting up, then the counter is reset and counted again. During a count
this is a countdown from the set value to 0. When the countdown reaches 0, the walking belt will stop
stops continuously.
30
Publicité
