Grandstream GVC3212 Guide D'installation Rapide page 5

CONFIGURING GVC3212 VIA WEB UI
1. Ensure your GVC3212 is properly powered up and connected to the
Internet.
2. The IP address of the GVC3212 will show on the top status bar of the
connected display device (e.g., TV) via HDMI.
3. Type the IP address in your PC's browser (see figure below).
4. Enter username and password to login. (The default administrator
username is "admin" and the default random password can be found at
the back sticker on the GVC3212).
Note: Please contact your ITSP (Internet Telephony Service Provider)
for additional settings that may be necessary to configure the GVC3212.
The GNU GPL license terms are incorporated into the device firmware and
can be accessed via the Web user interface of the device at my_device_ip/
gpl_license. It can also be accessed here:
http://www.grandstream.com/legal/open-source-software
To obtain a CD with GPL source code information please submit a written
request to info@grandstream.com
For the detailed user manual, please download from:
http://www.grandstream.com/support
~ 5 ~
ZH
GVC3212不预设对医院，执法机构，医疗中
心(急救服务)以及各种紧急服务的紧急通话服
务。用户必须自行设定紧急通话功能。用户
必须自行购买SIP兼容的网络电话服务，正确
的设定GVC3212使用该服务，并定期测试您
的配置以确保GVC3212如预期工作，否则请
购买传统无线或有线电话服务来拨打紧急通
话。
Grandstream Networks 公司的GVC3212不支
持紧急通话服务。Grandstream Networks公
司、其管理者和员工以及其相关机构对此所
造成的任何索赔、损失或者损害都不负有任
何法律追究责任。在此，您将无权对任何以
及所有由于无法通过GVC3212拨打紧急电话
以及没有遵照前段文字描述而造成紧急通话
失败的事件提出诉讼。
~ 6 ~