Hayter Harrier 41 Pro Autodrive Manuel De L'utilisateur page 16

Operation
Note: Determine the left and right sides of the machine from the normal operating position.
Before Operation
Inserting the Electric-Start Button
Remove the electric-start button (1) from the plastic parts bag and insert it into the electric starter (2).
Figure 8.
Installing the Battery Pack
Important: Use the battery pack only in temperatures that are within the appropriate range; refer to
Specifications.
1. Make sure that the vents on the battery are clear of any dust and debris.
2. Lift up the battery-compartment lid (A of Figure 9).
3. Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into
the compartment until it locks into place. (B of Figure 9).
4. Close the battery compartment-lid (C of Figure 9).
Note: If the battery-compartment lid does not close completely, the battery is not fully installed.
1
2
Figure 8
1. Electric-Start Button
2. Electric Starter
A B
Figure 9
C
16
EN