CONCORD Eye-Q 3042 AF Mode D'emploi page 7

TURNING THE CAMERA ON AND OFF
The Power Button is located on the top of the camera. (fig.1.1)
1. Press the ( ) Power Button to power the camera on.
• The LCD will turn on automatically.
2. To turn the camera off, press the (
Note:
To extend battery life, the LCD will be off after 1 minute of inactivity, press (
LCD. The camera will automatically power off after 2 minutes of inactivity, press the Shutter Button to power
the camera back on.
Checking the Battery Level
There are 5 battery levels that are displayed on the LCD.
Batteries are full
and ready to use.
1/4 battery
capacity remains.
Batteries are low
need to be
replaced soon.
Note:
• The camera's battery level indicator may not accurately reflect the state of a rechargeable battery even
the chargeable batteries have been fully recharged due to the inherent problem with rechargeable
batteries.
• To extend battery life, the camera will automatically power off after 2 minutes of inactivity. To change this
setting please refer to p.27.
• For better performance, please use NiMH rechargeable batteries.
• Remove the batteries from the camera if they will not be used for an extended period of time to prevent
corrosion or battery leaks.
All manuals and user guides at all-guides.com
) Power Button.
capacity remains.
empty, blinking
red and need to
6
3/4 battery
Batteries are
be replaced.
A
AWB
GETTING STARTED
fig.1.1
) button to reactivate the
1/2 battery
capacity remains.