Sony SCD-C222ES Mode D'emploi page 5

ANALOG DIGITAL (CD)
2CH OUT 5.1CH OUT OUT
FRONT SURR CENTER
COAXIAL OPTICAL
L
L
R
SUB
R
WOOFER
To
SURROUND
To FRONT
or REAR IN
IN jacks
jacks (L/R)
(L/R)
Multi-channel amplifier,
AV amplifier, etc.
Notes
• When you make the Multi-channel connection, connect the
ANALOG 2CH OUT jacks also using another audio connecting
cord ( not supplied) so that you can play a CD (or SACD) when
you set the input selector of your amplifier to CD (or SACD)
input .
• During playback of a conventional CD or a 2CH Super Audio
CD, the same signal that is output from the ANALOG 2CH
OUT jacks is also output from the ANALOG 5.1CH FRONT L/
R jacks.
• During playback of a Multi-channel Super Audio CD, the same
signal that is output from the ANALOG 5.1CH FRONT L/R
jacks is also output from the ANALOG 2CH OUT jacks. (The
down mixed signal of the Multi-channel signal is not played
back.)
• There are 5CH, 4CH, and 3CH Super Audio CD. When you
play these disc, the signal does not output from all the jacks of
the ANALOG 5.1CH OUT. For details of the playback, see the
cover or instructions of the Super Audio CD.
CONTROL
A1ΙΙ
To
To SUB
CENTER
WOOFER
IN jack
IN jack
Connecting via ANALOG 2CH OUT jacks
Use an audio connecting cords for this connection. Connect the
ANALOG 2CH OUT L/R jacks to the CD (SACD) input jacks of
your amplifier. Be sure to match the color-coded pin to the
appropriate jacks: white (left) to white and red (right) to red.
Audio connecting cords (Red and White) (not supplied*)
White (L)
Red (R)
* If you do not make the ANALOG 5.1 CH connection (page 4),
you can use the supplied audio connecting cable for the
ANALOG 2CH connection.
ANALOG DIGITAL (CD)
2CH OUT 5.1CH OUT OUT
FRONT SURR CENTER
COAXIAL OPTICAL
L
L
R
SUB
R
WOOFER
To CD (SACD) IN
jacks (L/R)
Stereo amplifier, etc.
White (L)
Red (R)
CONTROL
A1ΙΙ
5
US