IMASS A3 Manuel D'utilisation page 17

English
Setting a schedule/only possible using the app
The robot vacuum cleaner is always put into operation for the defined period, unless the power switch on the
robot vacuum cleaner is turned off.
Configuring the app
Step 1
Turn on the robot vacuum cleaner and press the Wi-Fi button on the remote control. Press and hold the
button for 5 seconds. The device will emit an acoustic signal. Then go the Wi-Fi settings to connect the robot
vacuum cleaner with your smartphone (IMASS-00XX Hotpoint).
Step 2
Go to the Wi-Fi settings on your smartphone and select IMASS-00XX Hotpoint. Open the dropdown menu in
the IMASS app. Available here:
App Store: https://itunes.apple.com/de/app/imass/id1260172715?mt=8
Android: https://play.google.com/store/apps/details?id=www.doorway.com.imass
Step 3
Select Wi-Fi settings. You will find it in the top left corner the first time you open the app.
Step 4
Select the upper Wi-Fi symbol and tap on it. At the top right, confirm the data in the overview.
Step 5
Now go to the Control Center. Enjoy!
032
Cleaning mode
Auto-cleaning mode (default mode)
This is the most frequently used mode. When in auto-cleaning mode, the robot
describes a zigzag pattern during cleaning and changes direction when it encounters
an obstacle.
Spot cleaning mode
This mode is selected to deal with a lot of dirt or dust in one place. When in spot
cleaning mode, the robot describes a spiralling pattern around a particular area it has
been instructed to clean.
Zigzag smart cleaning mode
This mode is selected to deal with a lot of dirt or dust in a small area. The robot
describes a zigzag pattern with a width of 1 metre to ensure thorough cleaning.
Edge cleaning mode
This mode is selected to clean the edges and corners of a room. When in edge
cleaning mode, the robot cleans along an edge (e.g. a wall). The robot automatically
returns to default mode once it has cleaned all areas.
Schedule for cleaning mode
This mode is used to define an automatic cleaning schedule. It is defined using the
smartphone app (note: the default cleaning mode for scheduled cleaning is AUTO
cleaning mode).
Add water level settings for the mop function – MOP
Attach the water tank and then press the "+" button to set the add water mode.
Press ">" to add more water (in increments). Press "<" to add less water (in increments). There are three add
water levels: low, medium and high. Once you have selected the correct mode, press "+" to confirm the settings.
Alternatively, the robot vacuum cleaner will automatically accept the selected mode after 5 seconds and then
quit the add water level setting mode.
Note: Remove the EVA shock absorber (black part) before selecting this mode.
EVA shock absorber
English
EVA shock absorber
033