Docking Station; Using The Remote Control - IMASS A3 Manuel D'utilisation

English

Docking station

Remote control
Power on/off
Forwards
Left
WI-FI
Increase suction
power
Edge cleaning
028
Power display
Charging contacts
Home button
Start / Pause
Right
Local cleaning
Spot cleaning
Voice switch
CLEAN status button
Robot status
Charge
Charging complete
Operating mode
Robot error
Low battery

Using the remote control

1 2
4
3
5
6
7
10 8
9
11 12
Note:
1. Place two AAA type batteries into the
remote control.
2. Remove the batteries if you will not use the
remote control for a longer period.
English
Display status
Display flashes red
Display flashes green
Display flashes green
All displays flash
Display turns red
Press this button to turn on the device.
1
Press this button to send the robot back to the docking
2
station.
Press this button to turn on or off the device.
3
Press this button to move the robot forwards in the selected
4
mode.
Press this button so the robot turns right.
5
Press this button so the robot turns left.
6
Press this button to turn on Wi-Fi and connect the device.
7
Press this button to start local cleaning.
8
Press this button to put the robot in spot cleaning mode.
9
Press this button to send the robot back to the docking
10
station.
Press this button so the robot cleans along a wall.
11
Press this button to confirm the voice switch.
12
029