Subaru H001SFN100 Instructions D'installation page 5

6
PRE-ARRANGED JUMPER HARNESS CONNECTIONS
1. Locate the vehicle's 12-pin & 8-pin pre-fi t connectors
that are secured to the vehicle's wire harness with
breakaway tape near the upper passenger's side glove
box area. (FIGURE K)
2. Release the vehicle's 12-pin & 8-pin pre-fi t connectors
from the breakaway tape. (FIGURE L)
3. Plug the remote engine start pre-arranged jumper
harness 12-pin and 8-pin connectors into the
corresponding pre-fi t connectors. (FIGURE M)
PART NUMBER ISSUE
H001SFN100
DATE
00 1 Jun 2022
FIGURE K
12-Pin Pre-fi t
Connector
FIGURE L
FIGURE M
SUBARU OF AMERICA
8-Pin Pre-fi t
Connector
5 OF 11