Subaru H001SFN100 Instructions D'installation page 2

4
VEHICLE PREPARATION
1. Using a 10mm socket/ratchet, disconnect the negative
battery cable. (FIGURE A)
NOTE: Do not disconnect the battery terminal from
the battery post.
2. Open the glove box and press inward on the sides of
the glove box to disengage the retaining tabs from the
glove box inner cover. Disconnect the strut from the
glove box. (FIGURE B)
3. Using a panel removal tool, carefully press downward
to disengage three (3) pressure clips to remove the
passenger's side under dashboard fi nisher panel, if
equipped. (FIGURE C)
4. Using a panel removal tool, carefully remove the right
side dashboard panel by starting at the bottom access
notch and working upward to disengage six (6) pressure
clips. (FIGURE D)
ISSUE
PART NUMBER
H001SFN100
DATE
00
1 Jun 2022
FIGURE A
FIGURE B
FIGURE C
FIGURE D
SUBARU OF AMERICA
2 OF 11