Safety - Husqvarna K 770 Dry Cut Manuel D'utilisation

The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal emissions requirement. Maintenance,
replacement or repair of the emission control devices
and system may be performed by any nonroad engine
repair establishment or individual.
CALIFORNIA AIR RESOURCES BOARD
(CARB)
Note: This machine is considered a preempt Off- Road
Application as relating to CARB standards. The U.S
EPA has sole authority to establish emission standards
for preempt construction equipment. For more
information see www.arb.ca.gov/msprop/offroad/
preempt.htm
Type plate
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
Husqvarna AB
Huskvarna, SWEDEN
XXXXXXXXXXX
XXXXXXXXXXXX
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
861 - 004 - 27.02.2019
Row 1: Brand, Model (X, Y)
Row 2: Serial No. with manufacturing date (Y, W, X):
Year, Week, Sequence No.
Row 3: Product No. (X)
Row 4: Manufacturer
Row 5: Manufacturer address
Rows 6–7: EU type approval or Chinese MEIN number
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

• A power cutter is a dangerous tool if used carelessly
or incorrectly and can cause serious injury or death.
It is very important that you read and understand the
contents of this operator's manual. It is also
recommended that first time operators also obtain
practical instruction before using the machine.
• Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Do not use a product that appears to
have been modified by others and always use
original accessories. Non-authorized modifications
and/or accessories can result in serious personal
injury or the death of the operator or others.
• Keep the product clean. Signs and decals must be
fully visible.
• Never allow children or other persons not trained in
the use of the product to use or service it.
• Do not let a person use the product unless you make
sure that they understand the contents of the
manual.
• Long term inhalation of the engine's exhaust fumes
can represent a health risk. When the engine is
running the exhaust contains chemicals such as
unburned hydrocarbons and carbon monoxide. The
5