METRICA BRAVO LASER BOX Mode D'emploi page 5

OPERATING INSTRUCTIONS
IN SELF-LEVELED MODE
• Insert 2 AA Alkaline batteries (1.5 V)
• To switch on, move the black switch "S" to ON. The pen-
dulum is free to swing.
If the instrument is outside of its self-leveling range, the
laser line will flash. Reposition the instrument in its self-
leveling range.
• When switched on, the green LED "A" lightens and the
instrument is ready for use.
• TO PROJECT, press the button
• 1 time = vertical line | self-leveled
• 2 times = horizontal line ––
self-leveled
• 3 times = Cross +
• To turn off the instrument permanently MOVE the "S"
switch to OFF
WITH A FIXED CROSS
• To switch on, move the black switch "S" to OFF. The pen-
dulum is locked.
• TO PROJECT THE FIXED CROSS, press the button
3 seconds:
• When switched on, the red LED "A" lightens and the instru-
ment is ready for use.
All manuals and user guides at all-guides.com
:
self-leveled
• 1 time = vertical line
• 2 times = horizontal line
• 3 times = the device turns off
TECHNICAL CHARACTERISTICS
Capacity
(depending on ambient brightness)
Levelling accuracy
Self-leveling range
Damping
Signal out of leveling
Laser type
Laser power
Batteries
Size
for
Weight (without batteries)
Waterproof
Tripod thread
fixed
|
fixed
––
10 m
± 2 mm / 5 m
± 4 °
magnetic
flashing light
635 nm
Class II
2 x 1.5V AA
82 x 57 x 90 mm
0.36 kg
IP 43
1/4 "