HW-F350
AUTO POWER
AUTO POWER
AUTO POWER
REPEAT
REPEAT
DIMMER
DIMMER
TV VOL
V VO
TV CH
TV H
AUDIO SYN
AUDIO SYNC
USB/
USB/
OPTICAL
OPTICAL
AUX
AUX
TV SOURCE
TV SOURCE
HW-F355
AUTO POWER
AUTO POWER SoundShare
AUTO POWER SoundShare
REPEAT
REPEAT
HW-F350
AUTO POWER
AUTO POWER
REPEAT
REPEAT
DIMMER
TV VOL
TV VOL
TV CH
TV CH
AUDIO SYNC
AUDIO SYNC
HW-F355
TV MUTE
TV MUTE
TV INFO
TV INFO
TV PRE-CH DIMMER
TV PRE-CH DIMMER
SOUND EFFECT
SOUND EFFECT
SMART VOLUME
SMART VOLUME
HW-F350
TV VOL
TV VOL
TV CH
TV CH
AUDIO SYNC
AUDIO SYNC
AUDIO SYNC
HW-F355
TV MUTE
TV MUTE
TV INFO
TV INFO
TV PRE-CH TV EXIT
TV PRE-CH TV EXIT
S/W
/W
MUTE
MUTE
LEVEL
LEVEL
HW-F350
HW-F355
VOL
VOL
3D SOUND
3 3 D SOUND
3
PLUS
PLUS
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn on the
TV or any device connected to the Air Track with the optical cable.
Press AUTO POWER on the remote control of this unit.
• The Auto power link function turns on and off each time you press AUTO POWER.
AUTO POWER LINK
ON
OFF
▪
If a TV or any device connected to Air Track with the optical cable is
off and there is no digital input, the Air Track is turned off after 20
minutes.
Using the DIMMER function
This feature control the brightness of the Display.
Press DIMMER on the remote control of this unit.
DIMMER
Each time the button is pressed, the selection changes as follows :
DIMMER ON ➡ DIMMER OFF
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Air Track is connected to
a digital TV. If this occurs, adjust the audio delay time to match the video.
Press AUDIO SYNC +/–. on the remote control of this unit.
• You can use the + , - buttons to set the audio delay time between 0 ms
and 300 ms.
▪
In USB mode TV mode or BT mode, the Audio Sync function may
not work.
Using the DRC function
S/W
/W
LEVEL
LEVEL
This feature balances the range between the loudest and quietest sounds.
DRC
DRC
DRC
You can use this function to enjoy Dolby Digital sound when watching movies
at low volume at night.
Press DRC on the remote control of this unit.
• Each time the button is pressed, the selection changes as follows :
DRC STANDARD ➡ DRC MAX ➡ DRC MIN
Display
POWER LINK ON
POWER LINK OFF
19