MAINTENANCE
General
Ovention
MiSA
ovens are designed for maximum durability
®
®
and performance with minimum maintenance.
WARNING
ELECTRIC SHOCK HAZARD:
• Place unit in standby, allow unit to cool, turn OFF
power switch, and unplug unit before performing any
cleaning, adjustments, or maintenance.
• DO NOT submerge or saturate with water. Unit is not
waterproof. Do not operate if unit has been submerged
or saturated with water.
• Do not steam clean or use excessive water on unit.
• This unit is snot "jet-proof" construction. Do not use
jet-clean spray to clean this unit.
• Do not clean unit when it is energized or hot.
• Do not clean unit with metal scouring pads. Metal pieces
can break off pad and touch electrical components,
creating risk of electric shock.
• This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock, burn, or possible exposure to microwave
energy.
• Use only Genuine Ovention Replacement Parts when
service is required. Failure to use Genuine Ovention
Replacement Parts will void all warranties and may
subject operators of the equipment to hazardous
electrical voltage, resulting in electrical shock or burn.
Genuine Ovention Replacement Parts are specified to
operate safely in the environments in which they are
used. Some after-market or generic replacement parts
do not have the characteristics that will allow them to
operate safely in Ovention equipment.
When cleaning surfaces of door and oven that come
together when closing door, use only mild, non-abrasive
soaps or detergents applied with a sponge or soft cloth.
This unit has no "user-serviceable" parts. If service is
required on this unit, contact an Authorized Ovention Service
Agent or contact the Ovention Hotline at 855-298-6836.
CAUTION
Do not move or relocate unit for cleaning. Unit is bulky
and heavy.
Never use steel pads, wire brushes, or scrapers to clean
unit.
Oven must be inspected annually by an Authorized Service
Agent.
NOTICE
Wear protective rubber gloves and protective eye wear
when cleaning unit.
Improper cleaning of oven could damage catalyst and will
void unit warranty.
IMPORTANT NOTE:
Use of cleaning chemicals not approved by Ovention when
cleaning the oven chamber will void the warranty.
Daily Cleaning
To maintain performance and preserve the finish of the
Ovention MiSA oven, clean the unit daily.
Do not turn off power switch or unplug unit immediately
after use. Internal fans must cool oven to avoid damage to
electrical components.
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
1. Touch
on the touchscreen to
shut down and allow oven to cool.
Cooling fans will operate until
the oven chamber temperature
drops below 140°F (60°C).
2. After the cooling fans shut off:
a. Move the Power I/O (on/off)
switch to the O (Off) position.
b. Unplug the power cord.
3. Remove
and
discard
remaining food product.
4. Remove and clean the cook plate using a damp non-
abrasive cloth or nylon scouring pad (a non-abrasive
cleaner may be used for difficult stains).
5. Remove any spillages inside the oven chamber using
damp paper towel or a non-abrasive cloth.
6. Wipe down all surfaces inside the oven chamber using a
clean non-abrasive, damp cloth or nylon scouring pad.
7. Wipe dry the oven chamber using a dry, non-abrasive
cloth.
8. Wipe down all exterior surfaces using a non-abrasive,
damp cloth (a non-abrasive cleaner may be used for
difficult stains).
9. Wipe dry all exterior surfaces using a dry, non-abrasive
cloth.
10. Polish the exterior surfaces of the oven using a good
quality stainless steel cleaner.
11. Reinstall the cook plate (See INSTALLATION section).
16
English
CAUTION
NOTICE
Power I/O
Switch (off)
Power
Power
Cord
Cord
any
OVMISAM-0522