Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Touch to pause
cooking sequence.
Touch to cancel cooking
sequence. Touchscreen
returns to the Recipes screen.
Cooking Screen
• If the selected recipe contains any Cook Events, the
Cooking screen will change to show the name of the
recipe cooking as well as a countdown to the Cook
Event. When the Cook Event occurs, the cooking
sequence pauses and the Cook Event screen will appear
on the touchscreen. Open the oven door, remove the
pan/tray with food product, complete the action on the
food product, place the pan/tray with food product back
into the oven chamber, close the oven door, and touch
on the Cook Event screen to continue the cooking
sequence. See "Programming a Cook Event" in this
section for a detailed description of Cook Events.
• To pause a cooking sequence, touch
touchscreen will show "COOKING PAUSED". Touch
to resume the cooking sequence.
• When the cooking sequence is finished, the touchscreen
shows "[Recipe] DONE" and an audible alert sounds.
5. Open the oven door. Using a paddle, pan gripper, or other
utensil, remove the cooked food product and close the
oven door. CAUTION! BURN HAZARD—Always use
a paddle, pan gripper, or other utensil to load and
unload food product.
• The touchscreen will return to the Recipes screen.
NOTE: Touch
on the "DONE" screen to return to the
Recipes screen without opening the oven door.
Touch to show settings
for active recipe.
Indicates remaining
cook time.
Standby Shutdown
Use the following procedure to put the oven into standby
shutdown during extended periods of non-use.
1. Touch
on the touchscreen to shut down operation and
put the oven in standby.
• The element will shut off, and the Cooling screen will
appear on the touchscreen,
• The air blower and cooling fans will continue to operate
until the oven chamber temperature drops below 140°F
(60°C).
• After the chamber is cool, the oven status will read
"Oven Off". After a period of time, the touchscreen will
darken to a screen saver.
Shutdown
Use the following procedure to disconnect the oven from power
for cleaning and maintenance as well as long term shutdown.
1. Touch
on the touchscreen to shut down operation and
put the oven in standby. Cooling fans will operate until the
oven chamber temperature drops below 140°F (60°C).
CAUTION
Do not turn off power switch or
unplug unit immediately after
use. Internal fans must cool oven
to avoid damage to electrical
. The
components.
2. After the cooling fans shut off:
a. Move the Power I/O (on/off)
switch to the O (Off) position.
b. Unplug the power cord.
10
English
Power I/O
Switch (off)
Power
Power
Cord
Cord
OVMISAM-0522
Publicité
