EdilKamin Blade2 H 22 UP 22 Installation, Usage Et Maintenance page 5

INSTALLATION INSTALLATION
Only qualifi ed personnel may perform hydraulic Only qualifi ed personnel may perform hydraulic
installations and issue the appropriate declaration of installations and issue the appropriate declaration of
conformity on the work performed. conformity on the work performed.
All local regulations, including those which refer to All local regulations, including those which refer to
national and European standards, must be observed. national and European standards, must be observed.
The Anti-condensation Kit is designed for use with The Anti-condensation Kit is designed for use with
products up to 35 kW. products up to 35 kW.
The Anti-condensation Kit does not replace or The Anti-condensation Kit does not replace or
supplement any of the safety devices which the system supplement any of the safety devices which the system
must have according to standards. must have according to standards.
Connect the kit pipes to the generator delivery and Connect the kit pipes to the generator delivery and
return and to the system delivery and return (or the return and to the system delivery and return (or the
storage tank delivery and return). storage tank delivery and return).
See Figure 2 and Table 1 for the attachments. The See Figure 2 and Table 1 for the attachments. The
numbers for correct connection are also indicated on numbers for correct connection are also indicated on
the kit. the kit.
MAINTENANCE MAINTENANCE
The kit does not require maintenance in normal The kit does not require maintenance in normal
conditions. conditions.
Include correct water treatment according to current Include correct water treatment according to current
regulations on the system. The absence of correct regulations on the system. The absence of correct
treatment may cause damage to the kit. treatment may cause damage to the kit.
Thermo
Product
The Anti-Condensation Kit does NOT contain the circulator and the safety devices
which must be positioned on the rim of the thermo product or on the system,
according to installation standards in the country.
INSTALLATION
SPECIFICATIONS SPECIFICATIONS
Anti-Condensation Kit Anti-Condensation Kit
3/4" G female inlet couplings 3/4" G female inlet couplings
Brass valve body Brass valve body
Stainless steel valve spring Stainless steel valve spring
EPDM valve seal. EPDM valve seal.
Steel protection body. Steel protection body.
Flexible steel connection pipes Flexible steel connection pipes
Water and glycol solution operating fl uid Water and glycol solution operating fl uid
Maximum glycol percentage 50% Maximum glycol percentage 50%
Maximum operating pressure 10 bar. Maximum operating pressure 10 bar.
Temperature range 5- 100°C Temperature range 5- 100°C
Calibration temperature 50°C. Calibration temperature 50°C.
Calibration precision +/- 2°C. Calibration precision +/- 2°C.
5
Storage
tank