Publicité
Les langues disponibles
Les langues disponibles
Wireless clock thermostat
Weekly cycle.
Easy to install, easy to
clock thermostat will allow you to
control your heating system in
accordance with your way of life.
The RF clock thermostat has been designed to offer you comfort and energy savings. It
will be easily installed in your home and will control the ambient temperature according
to the program. It will control through radio waves the RF receiver.
The RF clock thermostat will control the ambient temperature according to 3 temperature
levels.
- "comfort" temperature: this is the temperature for your hours of presence.
- "reduced" temperature : this is the temperature for your brief absences or during the
night.
- "frost protection" temperature : this is the minimum temperature for long absences. It pro-
tects your dwelling from the risk of frost.
program, the RF
Where and how you should install
the RF transmitter
To control accurately the ambient temperature, the
transmitter must be installed 1,5 m. above the floor, on
an internal wall shaded from direct sunlight and from
all thermal influences such as : television, lamps,
heater,
The RF transmitter is delivered with a base. With this
accessory, you can simply put it on furniture (table,
etc...). It is important to check that no external
influence will perturb it (heater, window...).
You can also install it on an internal wall.
Therefore, take out its wall mounting base.
Fix it to the wall.
Then replace the product on its base.
The IP43 wall mounting
The IP43 wall mounting receiver can be easily installed
close to the boiler.
The RF transmitter will control the ambient tempera-
ture in the dwelling and will transmit ON and OFF
signals to the receiver. The output of the receiver will
then switch ON and OFF the boiler.
Transmitter and receiver coding
!
Important : the transmitter and
receiver assembly is factory
coded and is therefore imme-
diately operational.
There is no need to recode.
receiver
Publicité
