Nokia 770 Guide D'utilisation page 30

All manuals and user guides at all-guides.com
A c c e s s t h e I n t e r n e t
Connection type
want to access the Internet. To use a packet data service in a cellular
network, such as GPRS (network service), select
circuit-switched data service in a cellular network, such as high-speed
circuit-switched data (HSCSD; network service), select
2. In the Select cellular network type
network over which the Internet connection takes place:
or CDMA. You must select the network manually, if you have not
paired any mobile phone with your device.
3. In the connection setup dialog, define the following settings:
Tip: It is common in GPRS packet data networks that the
access point name is Internet or it is left blank; the dial-up
number is usually *99#; and the user name and the password
may be left blank. For CDMA packet data network settings,
contact your service provider.
Access point name
Obtain the name from your Internet service provider. This setting is
shown if you selected packet data connection, and your phone uses a
GSM cellular network.
Dial-up number — Enter the modem telephone number of the
Internet access point.
User name — Enter a user name, if required. The user name is usually
provided by the Internet service provider.
Password — Enter a password, if required. The password is usually
provided by the Internet service provider.
Prompt password at every login:
write a new password every time you log onto an Internet server, or if
you do not want to save your password in the device.
4. When you are finished, tap
Complete dialog to define advanced settings, if necessary. For more
information, see the help of the application.
30
— Select the type of network service over which you
dialog, select the type of cellular
— Enter the name of the Internet access point.
— Select this option if you wish to
Advanced
Packet data. To use a
Data
GSM/UMTS
in the Connection setup:
call.